Epoxy enamel price and other common and consumable item for construction works such as welding rod, coco lumber, nail, paint, tools, ppe and other materials needed for construction works. Epoxy enamel price below are in Philippine Peso (Php).
For bolts and nuts prices, please click the link, BOLTS AND NUTS PRICE LIST
For structural material prices, please click the link, STRUCTURAL MATERIAL PRICE LIST
For wall, ceiling and roof prices, please click the link, WALL, CEILING AND ROOF MATERIALS PRICE LIST
| ITEM NO. | DESCRIPTION | SIZE / DIMENSION | UNIT | AVE. PRICE | |
|---|---|---|---|---|---|
| 1 | Cyclone Wire | Gauge # 10, Opening: 2″ x 2″, 3ft x 10 meters | 1 | ROLL | 3250 |
| 2 | Gasket | 6mm thk, 1meter x 1 meter | 1 | ROLL | 2840 |
| 3 | Common Nail | 1 | KGS | 70 | |
| 4 | Common Nail | 1 | KGS | 70 | |
| 5 | Common Nail | 1 | KGS | 70 | |
| 6 | Concrete Nail | 1 | 104 | ||
| 7 | Finishing Nail | 1 | KGS | 80 | |
| 8 | Acetylene Gas | Tank is usually free rental | 1 | CYL | 1045 |
| 9 | Oxygen Gas | Tank is usually free rental | 1 | CYL | 438 |
| 10 | Acrylic Emulsion | 1 | GALS | 705 | |
| 11 | Concrete Epoxy Injection | 1 | GALS | 1834 | |
| 12 | Concrete Primer & Sealer | 1 | PAIL | 2618 | |
| 13 | Epopatch, Base and Hardener | 1 | SETS | 2075 | |
| 14 | Lacquer Thinner | 1 | GALS | 359 | |
| 15 | Paint Brush, Bamboo 1-1/2″ | 1 | PC | 35 | |
| 16 | Acrylic Paint | 1 | LTRS | 159 | |
| 17 | Paint, Epoxy Enamel Price | White | 1 | GAL | 1100 |
| 18 | Paint, Epoxy Floor Coating | 1 | GALS | 2800 | |
| 19 | Paint, Epoxy Primer | Gray | 1 | GAL | 865 |
| 20 | Paint, Epoxy Reducer | 1 | GALS | 529 | |
| 21 | Paint, Flat | Permacoat | 1 | PAIL | 2570 |
| 22 | Paint, Semi-Gloss | 1 | GALS | 675 | |
| 23 | Putty, Masonry | 1 | PAIL | 1396 | |
| 24 | Rugby | 1 | CANS | 648 | |
| 25 | Rust Converter | 1 | GAL | 771 | |
| 26 | Skim Coat | 1 | BAGS | 650 | |
| 27 | Underwarter Epoxy | 1 | GALS | 2211 | |
| 28 | Vulca Seal | 1 | LTR | 470 | |
| 29 | Broom, Soft | 1 | PC | 218 | |
| 30 | Chemical Gloves | 1 | PAIR | 212 | |
| 31 | Cotton Gloves | 1 | PAIRS | 18 | |
| 32 | Dust Mask N95 | 1 | PC | 28 | |
| 33 | Gloves, Orange Palm | 1 | PAIRS | 28 | |
| 34 | Hard Hat w/ Head Gear & Chin Strap | 1 | 20 SET | 221 | |
| 35 | Overall w/ Reflector | 1 | PC | 1074 | |
| 36 | Oxy-Acetylene Cutting Outfit | 1 | SETS | 17125 | |
| 37 | PVC Apron | 1 | PC | 508 | |
| 38 | Respirator mask w/ cartridge | 1 | PC | 2117 | |
| 39 | Respirator, Filter Cartridge | 1 | PACK | 656 | |
| 40 | Safety Goggles | 1 | PC | 130 | |
| 41 | Safety Rubber Boots | 1 | PAIR | 391 | |
| 42 | Safety Shoes | 1 | PAIRS | 960 | |
| 43 | Safety Vest | 1 | PC | 120 | |
| 44 | Weldind Mask | 1 | PC | 130 | |
| 45 | Welding Apron | 1 | PC | 262 | |
| 46 | Welding Mask, Auto Darkening | 1 | SETS | 2500 | |
| 47 | Concrete (Ready Mix) | 1 | M³ | 7965 | |
| 48 | Concrete Epoxy | 1 | SET | 3000 | |
| 49 | Concrete Patching Compound | 1 | KGS | 386 | |
| 50 | GI Wire | No. 16 | 1 | ROLL | 2415 |
| 51 | Gravel | 1 | LOADS | 5900 | |
| 52 | Non-Shrink Grout | 1 | BAGS | 621 | |
| 53 | Portland Cement | 1 | PC | 247 | |
| 54 | Sand | 1 | LOADS | 3100 | |
| 55 | Rivets | 1/8″ X 1/2″ | 1 | BOX | 200 |
| 56 | Rivets | 1-1/2″ X 1/2″ | 1 | BOX | 250 |
| 57 | Rope | 1/2 Diameter | 1 | meters | 26 |
| 58 | Tape, Caution | 1 | ROLLS | 800 | |
| 59 | Tile Grout | 1 | BAGS | 61 | |
| 60 | Tiles, Floor | 600mm x 600mm | 1 | PC | 152 |
| 61 | Tiles, Wall | 300mm x 300mm | 1 | PC | 33 |
| 62 | Adjustable Wrench Set | 4″ – 24″ | 1 | SET | 2468 |
| 63 | Baby Roller (Cotton) | 4″ | 1 | PC | 63 |
| 64 | Ball Hammer | 1 | PC | 671 | |
| 65 | Bench Vise | 1 | UNIT | 5122 | |
| 66 | Blade Cutter | 1 | PC | 57 | |
| 67 | Broom Stick | 1 | PC | 37 | |
| 68 | Camlock (Male & Female Set) | 50mm Diameter | 1 | SET | 1585 |
| 69 | Chalk Stone | 1 | PC | 7 | |
| 70 | Chipping Gun | 1 | UNIT | 30607 | |
| 71 | Combination Wrench Set | 6mm – 32mm | 1 | SET | 3340 |
| 72 | Cut-off Wheel | 16″ Diameter | 1 | BOX | 6295 |
| 73 | Cutting Disc | 4″ Diameter | 1 | BOXES | 1570 |
| 74 | Cutting Disc | 7″ Diameter | 1 | BOXES | 3785 |
| 75 | Drill Bit | 1 | BOXES | 608 | |
| 76 | Electrical Plier | 1 | PC | 408 | |
| 77 | Grinder, Angle | 4″ | 1 | UNITS | 4017 |
| 78 | Grinder, Angle | 7″ | 1 | UNIT | 9184 |
| 79 | Grinder, Baby | 1 | UNIT | 5053 | |
| 80 | Grinder, Mother | 1 | UNIT | 9025 | |
| 81 | Grinding Disc | 4″ Diameter | 1 | BOXES | 929 |
| 82 | Grinding Disc | 7″ Diameter | 1 | BOXES | 1875 |
| 83 | Heat Gun | 1 | UNIT | 3500 | |
| 84 | Ladder (A-Type), 6ft, Aluminum | 1 | PC | 2270 | |
| 85 | Level Bar | 24″ | 1 | PC | 540 |
| 86 | Paint Brush | 4″ | 1 | PC | 63 |
| 87 | Paint Brush | 2″ | 1 | PC | 39 |
| 88 | Portable Axial Fan Blower | 8″ Diameter | 1 | set | 8295 |
| 89 | Power Rachet | 1 | UNIT | 8068 | |
| 90 | Rivet Gun / Riveter | 1 | UNIT | 820 | |
| 91 | Roller Brush | 7″ | 1 | PC | 97 |
| 92 | Sand Paper | #100 | 1 | MTRS | 202 |
| 93 | Sand Paper | #50 | 1 | MTRS | 284 |
| 94 | Screw Driver, Flat | 1 | SET | 273 | |
| 95 | Screw Driver, Philip | 1 | SET | 290 | |
| 96 | Shovel, Pointed | 1 | PC | 500 | |
| 97 | Snop Ring Plier | 1 | SET | 548 | |
| 98 | Socket Wrench Set | 19mm – 50mm | 1 | SET | 6329 |
| 99 | Speed Cutter | 1 | UNIT | 10000 | |
| 100 | Steel Brush | 1 | PC | 30 | |
| 101 | Test Light | 1 | PC | 158 | |
| 102 | Test Wrench | 1 | UNIT | 5940 | |
| 103 | Torque Wrench | 1 | UNIT | 5217 | |
| 104 | Vise Grip | 1 | PC | 456 | |
| 105 | Welding Machine (Portable) | 12.3 kVA (20-300A) | 1 | UNITS | 19500 |
| 106 | Putty, Multipurpose | 1 | PAIL | 883 | |
| 107 | Stainless Welding Rod | 308 (3.2mm) | 1 | KGS | 500 |
| 108 | Welding Rod | 6011 (3.2mm) | 1 | KGS | 125 |
| 109 | Welding Rod | 6011 (3.2mm) | 1 | BOX | 2400 |
| 110 | Welding Rod | 6013 (3.2mm) | 1 | KGS | 107 |
| 111 | Welding Rod | 6013 (3.2mm) | 1 | BOX | 2000 |
| 112 | Coco Lumber S4S | 2″ x 3″ x 12ft | 1 | PC | 210 |
| 113 | Coco Lumber S4S | 2″ x 4″ x 12ft | 1 | PC | 280 |
| 114 | Plywood | 1/2″ x 4ft x 8ft | 1 | SHEETS | 750 |
| 115 | Plywood | 1/4″ x 4ft x 8ft | 1 | SHEETS | 400 |
Below are the common and consumable item price list for construction works such as welding rod, coco lumber, nail, paint, tools, ppe and other materials needed for construction works. All prices below are in Philippine Peso (Php). For other reference prices: – Bolts and nuts prices, please click the link, BOLTS AND NUTS PRICE LIST – … Read more